1-1/2" In-Line Foam Eductor

Features

• Corrosion Resistant Brass Construction
• 1-1/2” swivel inlet X 1-1/2”male outlet
• Eductor rated for optimum flow at 200 PSI (14 Bar)
• Furnished with 30”(76cm) pick up tube
• Variable metering valve
• Removable metering valve
• A large, easy to read metering dial
• Ball check valve prevents back flow into foam concentrate

Operating Procedures

Must be used with a nozzle of equivalent flow rate

Maximum hose lay between eductor and nozzle on level ground using 1½"(3.8 cm) hose is 150 ft.(46m)

Maximum hose lay between eductor and nozzle on level ground using 2"(5 cm) hose is 300 ft.(91m)

Normal inlet operating pressure at eductor is 200 psi; however, the eductor can be used at lower inlet pressures with a  corresponding reduction in flow rates

* Pressure loss through the Chemguard eductor is approximately 35% of the inlet pressure

Suitable 

Suitable for use with water,  AFFF, AR-AFFF, Fluoroprotein and Class “A” foam concentrates